Everything from one source. From the luminaire to the platform.
Not every streetlight can be retrofitted. Some lack the right interface, others have simply reached the end of their service life. For these cases we supply our own smart luminaires: robust, long lasting and significantly cheaper than branded luminaires. The node is already built in. You get luminaire, sensors and management platform from a single source, from planning to installation.
Retrofit where possible. Build new where it makes sense.
Our core product is the EnvioLux™ Node: a module that makes existing street lighting intelligent, without replacement and without civil works. The prerequisite is a standardized Zhaga Book 18 interface on the luminaire head. Many older streetlights lack this interface, others have simply reached the end of their service life. That is exactly why we also offer the luminaire itself as part of the one stop shop. We plan the lighting for your streets, supply our own LED luminaires, mount our nodes directly on them and install everything on site. This way you get new luminaires and smart infrastructure in one go, instead of awarding two projects one after another.
Retrofit an existing luminaire
If a Zhaga interface fits, we simply add the node. No replacement needed.
New luminaire including node
If the interface is missing or the luminaire has reached end of life, we supply and install our own luminaire, with the node already mounted.
One procurement process instead of two
Planning, luminaire, node and installation run through a single order and a single point of contact.
A luminaire every municipality can afford.
The EnvioLux™ EB23 is not a design luminaire, and that is intentional. We invest every euro in what matters: bright, even light, a long service life and low consumption. Not decoration. The result is a luminaire that lets you modernize not just individual streets but your entire stock, without the budget limiting the scope.
Branded luminaires quickly cost several hundred euros each. For many municipalities that means converting in small steps over years. Our EB23 makes area wide conversion to LED plannable and affordable. You pay for brightness and durability, not for form.
Convert your municipality to LED completely within a few weeks, for a fraction of what branded luminaires cost. Up to 80 % less energy consumption included.
Price leadership
Significantly cheaper than comparable branded luminaires.
Up to 80 % savings
Modern LED technology compared to legacy systems.
Quick to install
Tool free mounting, flexible pole adapter from 32 to 60 mm.
Lean on price. Not on substance.
A low price raises fair questions. That is why we are transparent about what goes into the EB23. We save on design, not on technology. The luminaire uses high quality components from established manufacturers and is built to applicable European standards. It is built for continuous outdoor operation and designed for long maintenance intervals.
- LED chips from Lumileds LUXEON®
- Driver from Inventronics (D4i capable)
- Die cast aluminum housing, safety glass cover
- IP66 and IK09, 10 kV surge protection (sealed, impact resistant, surge safe)
- 100,000 h service life (L70), operation from minus 40 °C to 50 °C
- CE and RoHS compliant, per EN/IEC 60598 and 62262
The luminaire already comes smart.
Every EB23 is prepared for networking from the factory. Via the standardized Zhaga Book 18 interface and the D4i capable driver, the EnvioLux™ Node can be added directly. This turns the luminaire into a data point in your infrastructure: dimmable in real time, remote controllable and able to capture weather and environmental data. Your infrastructure grows with you, without the luminaire ever needing to be replaced again.
Four sizes for every street.
| Model | Power | Luminous flux | Efficacy | Weight |
|---|---|---|---|---|
| EB23-S | 50 W | 8,000 lm | 160 lm/W | 3.3 kg |
| EB23-M | 80 W | 12,800 lm | 160 lm/W | 4.6 kg |
| EB23-L | 120 W | 19,200 lm | 160 lm/W | 6.3 kg |
| EB23-XL | 240 W | 38,400 lm | 160 lm/W | 6.7 kg |
Color temperature selectable (1800 to 6500 K) · optics type I and II · CRI > 70 · dimming 1-10 V and DALI/D4i · voltage AC 100 to 240 V · power factor > 0.95 · pole adapter 32 to 42 mm and 48 to 60 mm · tool free maintenance.
From residential streets to regional utilities.
Streets and residential areas
Demand based dimming at night.
Industrial and commercial areas
Motion triggered light during off peak hours.
Parks and paths
Safety without permanent lighting.
Regional associations and utilities
Rolling out across many municipalities.
Everything from one source: from lighting design to commissioning.
You do not need to coordinate trades. We handle the lighting design, point out suitable funding programs, supply the luminaires with the node already mounted, organize installation through a vetted partner network and commission everything down to the live dashboard. One point of contact, one project, one result.
EnvioLux™ luminaires
Affordable smart LED luminaires with the node already mounted.
EnvioLux™ nodes
Retrofit modules that make existing luminaires intelligent.
EnvioTerminal
The platform that makes everything controllable across manufacturers.
Lighting design
Standards compliant planning for your streets, including our own luminaires.
Funding advice
Find suitable funding programs and support with the application.
Installation and commissioning
Installation through a vetted partner network, all the way to the live dashboard.
What municipalities most often ask about the luminaires.
- Because we save on design, not on technology. We build functional luminaires with high quality components and skip expensive brand markups. The price advantage comes from lean design and a clear focus on what matters.
- The EB23 is rated for over 100,000 operating hours, protected to IP66 and IK09, and equipped with LED chips from Lumileds and a D4i capable driver. It meets the applicable EN/IEC standards and is CE and RoHS compliant.
- No. We handle replacement and installation. On request we also arrange proper disposal of the old luminaires.
- Yes. That is exactly the point. We assess your existing stock and combine retrofit modules and new luminaires so you have a single project instead of several separate procurements.
- Yes. We plan the lighting to standard for your streets, including our own luminaires, show you suitable funding programs and support the application. From planning to commissioning, everything stays in one hand.
- Yes. Every luminaire is compatible with Zhaga Book 18 and a D4i capable driver, and therefore prepared for the EnvioLux™ Node. Networking, dimming and data capture can be added at any time, without replacing the luminaire.
Ready to relight your city?
In a 30 minute conversation we clarify feasibility, scope and timeline for your municipality.