City center
Market square and pedestrian zone
Warm ambient light during busy hours, gentle dimming during quiet night hours. Comfortable public space without stray light.
View matching productSmart City starts with light
Modernise street lighting intelligently.
Two routes, one system: we retrofit suitable LED luminaires with Zhaga nodes and replace outdated luminaires with the EnvioLux system luminaire, always with smart control.
On top comes EnvioTerminal, the lighting management platform that lets you control and analyse your entire installed base in real time and across vendors. Lighting design, funding, installation and operation come from a single source, so you cut energy use and reach your sustainability targets faster.
up to 80 %
lower energy consumption
< 15 min*
installation per luminaire
no civil works
Plug-and-play with Zhaga
* Indicative value for pure installation per luminaire under typical conditions. Not a legally binding commitment.
−0 % energy
brightup to 80 % savings
What does ENVIOTECH do?
Street lighting becomes an intelligent lighting system.
ENVIOTECH modernises municipal street lighting along two equally valid routes. Where the existing LED luminaire is suitable, we retrofit it with a Zhaga node and make it controllable, measurable and dimmable on demand. Where a luminaire is outdated or technically unsuitable, we replace it with the EnvioLux system luminaire, always together with a node and the EnvioTerminal lighting management platform. Design, funding, installation and operation come from a single source.
- Starting point01
Your existing lighting is a blind spot.
Your municipality operates thousands of street lamps that consume power around the clock and cannot be controlled so far.
- What we do02
Retrofit where it fits. Replace where it is needed.
Suitable LED luminaires receive a Zhaga node within minutes. Outdated luminaires are replaced by the EnvioLux system luminaire with smart control included.
- Result03
One system, centrally controlled.
You control and monitor every luminaire through EnvioTerminal, save up to 80 % energy, and lay the foundation for further Smart City applications.
Adaptive lighting
Light only where it is needed.
Our sensors detect motion and dim every luminaire in real time. Safety is maintained, energy consumption drops, measurably and traceably.
How it works
Four steps to smart infrastructure.
From the first inventory survey to live operation, everything stays in one hand. The path is short because our system is built on open standards.
- 01Step 01
Clarify inventory and funding
We record your luminaire inventory, calculate the savings potential and show suitable funding programmes, including support with the application.
Free initial assessment
- 02Step 02
Configure the solution
You choose luminaire model, node and sensors. Whether retrofitting the existing stock or a full renewal from one source, we plan to standard for your streets.
Lighting design included
- 03Step 03
Attach in under 15 minutes*
On site, the module is plugged onto the standardized interface on the luminaire head by our vetted partner network. No replacement, no civil works, no special tools.
Installation via partner network
- 04Step 04
Control via EnvioTerminal
You then control every luminaire, every sensor and every schedule centrally through one platform, including zero touch provisioning and live analytics.
Operation and analytics
* Indicative value for pure installation per luminaire under typical conditions. Not a legally binding commitment.
Products
A complete lighting system.
Zhaga nodes retrofit suitable luminaires, the EnvioLux™ system luminaire replaces outdated ones, and EnvioTerminal (IMS) controls and monitors the entire installed base centrally. Design, funding, installation and operation come from a single source.
EnvioLux™ Core Kit
The plug-on retrofit module. It makes any existing lamp remotely controllable and dimmable on demand, installed in under 15 minutes.
Compatible with Zhaga Book 18 & D4iInstallation in <15 minadaptive dimming
View details
EnvioLux™ Sense Kit
Everything from the Core Kit, plus a camera-free radar sensor that detects motion and brightens the light only when needed.
camera-free radarmotion-based dimmingGDPR compliant
View details
EnvioTerminal (IMS)
The central platform through which you control, monitor, and analyze all luminaires in real time. It is the core of the system.
real-time monitoringcentral control35+ Smart City extensions
View detailsOptional service
Everything from a single source: from lighting design through financing to rollout.
We support municipalities and utilities end to end. Lighting design per DIN standards, funding advice, tendering, installation, and operation, all coordinated through one point of contact.
Your benefits
What ENVIOTECH delivers for your municipality.
Concrete value for mayors, finance departments, and residents, not just technology.
Significantly lower energy costs
Up to 80% less power consumption in street lighting, noticeable in the next budget.
More safety for your residents
Light is bright exactly when someone is out. Fewer unsafe areas, same comfort.
Less light pollution
Residents sleep more soundly, insects and wildlife are protected, the night sky stays visible.
Measurable climate contribution
Less CO₂ emissions per luminaire and year, documented and eligible for municipal climate targets.
Higher quality of public space
Busy squares and paths are lit more pleasantly, quiet areas are not disturbed.
Future-proof infrastructure
One foundation, many applications: lighting today, traffic, environment, and parking tomorrow.
In the press
People are talking about us.
Trade press and national media covering our work for municipal infrastructure.
Mentioned in
Frankfurter Allgemeine ZeitungEFahrer.comSamsung NewsroomStartHub Hessentech.euTech Funding NewsStartupValleydeutsche startupsStartbaseStartup InsiderIT BOLTWISEFrankfurter Allgemeine ZeitungEFahrer.comSamsung NewsroomStartHub Hessentech.euTech Funding NewsStartupValleydeutsche startupsStartbaseStartup InsiderIT BOLTWISE
Standards and memberships
Open standards, no proprietary lock-in.
We actively participate in the relevant industry bodies and build on established standards.
Member of DALI AllianceMember of ZHAGA ConsortiumCompatible with Zhaga Book 18 & D4i
GDPR compliant by design.
No cameras, no personal data. Radar sensing detects motion, not people.
Developed in Germany · Data in Germany · Support from Germany
Engineering, system integration and software from Germany, with the right hardware for each project.
Solutions
One infrastructure, many use cases.
We start with lighting and expand step by step. Browse typical use cases in cities, neighborhoods, and commercial areas.
Residential area
Residential and play street
Less light on quiet streets, more safety when someone approaches. Residents benefit, energy consumption drops.
View matching product
Traffic junction
Intersection with motion detection
Radar detects vehicles and pedestrians and brightens the affected luminaires in real time. Safe visibility without permanent full lighting.
View matching product
Active mobility
Bicycle and pedestrian path
Light follows cyclists and pedestrians along their route. Comfortable, safe, and significantly more efficient than permanent operation.
View matching product
Commercial
Industrial and commercial area
Light large areas on demand. Loading zones, walkways, and security areas controllable independently.
View matching product
Parking
Parking lot and guidance system
Detect occupancy with sensors, understand traffic flows, and reduce parking search traffic in the city.
View matching product
Green spaces
Park and green area
Path lighting that is gentle on insects and residents. Warm spectrum, directed light, adaptive night dimming.
View matching product
School routes
School and daycare surroundings
Reliably bright light at drop-off and pick-up times, sensitive dimming during quiet times. Motion at crossings is prioritized.
View matching product
Public transport
Station forecourt and public transport hub
Frequency-based lighting at stops and access points. Waiting passengers are comfortably and safely lit.
View matching product
Infrastructure
Tunnel and underpass
Adaptive interior lighting that responds to traffic density and daylight. Visual comfort and energy efficiency at once.
View matching product
Buildings
Public buildings and facades
Intelligently control facade and forecourt lighting. Event-driven, energy-efficient, and centrally managed.
View matching productReady for the next step?
Show us your existing lighting. We show you your savings.
Number of luminaires, operating hours, current wattage. You get a reliable estimate on energy, cost and payback. A 30 minute call clarifies feasibility and timing.
Example calculation1,200 luminaires
- Energy per year
- minus 71 %
- Payback
- 3.2 years
- CO₂ per year
- approx. 380 t
- Installation
- 6 weeks
Values shown for illustration. You get your real figures in the savings calculator.
Frequently asked questions
What municipalities and utilities ask us most often.
The key answers in short form. Something missing? Just get in touch with us.
- Usually yes. The requirement is the standardised Zhaga Book 18 interface on the luminaire head, which is standard in modern street lights. In the savings calculator we check your existing stock upfront.
- No. The module simply plugs onto the existing luminaire. No excavator, no new cables, no road closures.
- No cameras are used. Our sensors work with radar and detect movement, not people. No personal data is created.
- In typical night-time scenarios 60 to 80 % is possible, depending on operating hours, road class and traffic volume. The savings calculator gives you an individual forecast.
- Under 15 minutes per luminaire, including zero-touch provisioning. A roll-out across 1,000 luminaires is feasible within a few weeks. (* Guide value per luminaire, not a legally binding commitment.)