On compatible LED luminaires
EnvioLux™ Core Node
Control and monitoring node. Plugs into the upper or lower Zhaga socket, controls dimming and, on luminaires with adjustable light colour, colour temperature. Reads more than 60 driver values via D4i.
EnvioLux™ Core Kit
Retrofit compatible LED luminaires with smart control. EnvioLux™ Core nodes connect through a Zhaga Book 18 socket and D4i driver for remote control and demand-based dimming. EVL-Connect gateways link the wireless network to EnvioTerminal™.
- less energy consumption
- up to 80%
- installation per luminaire
- < 15 min
- robust and low-maintenance
- IP66 · IK09
One kit, two node types.
EnvioLux™ Core sits on the streetlight, EVL-Connect builds the network.
Gateway · per 50 to 100 streetlights
EVL-Connect Node
The router of the streetlight network. Replaces one Core on its pole, builds the mesh and sends the bundled data of all surrounding streetlights to the cloud.
How your streetlights form a network.
Each node passes data to its neighbours until a gateway uploads it to EnvioTerminal™.
Self-healing mesh
If a streetlight fails, the signal automatically finds a new route. No single point of failure.
Cloud in Europe
The gateway sends encrypted data to the cloud hosted in Europe.
Stable during power outages
An integrated, chemically non-flammable battery keeps processor and radio active. The network keeps its state.
Alternative path connected
Everything a modern retrofit node needs.
Works across manufacturers
For compatible LED luminaires with an upper or lower Zhaga Book 18 socket and a D4i driver.
Remote control and dimming
Controls the brightness of compatible LED luminaires remotely, by schedule or on demand.
Colour temperature and insect protection
Luminaires with adjustable light colour can switch to warm light on a schedule. Directed light and demand-based dimming limit unnecessary light output.
D4i data readout
Reads more than 60 driver values: energy, operating hours, temperature and fault status.
Secure 2.4 GHz mesh
All nodes communicate with AES-128 encryption and pass data on to the gateway.
EnvioTerminal™ connection
Every node appears automatically in the digital twin of your lighting network.
Technical data
- Interface
- Compatible with Zhaga Book 18 (upper or lower socket)
- Control and data
- Compatible with DALI D4i (DALI-2), more than 60 data points
- Radio network
- 2.4 GHz mesh, AES-128
- Protection rating
- IP66, IK09
All technical data
- Included nodes
- EnvioLux™ Core and EVL-Connect (gateway)
- Interface
- Compatible with Zhaga Book 18 (upper or lower socket)
- Control and data
- Compatible with DALI D4i (DALI-2), more than 60 data points
- Radio network
- 2.4 GHz mesh, AES-128
- Gateway ratio
- About 1 EVL-Connect per 50 to 100 streetlights (approx. 100 m)
- Power supply
- 24 V DC, 3 W (via the luminaire)
- Battery
- Integrated, chemically non-flammable
- Protection rating
- IP66, IK09
- Certification
- CE, RED
- Cloud
- Hosted in Europe, GDPR-compliant
- Installation
- Under 15 minutes per luminaire
Frequently asked questions
Does the Core Kit fit our existing luminaires?
It needs an LED luminaire with an upper or lower Zhaga Book 18 socket and a suitable D4i driver. We check this from the luminaire type and driver, using a sample where installation years differ. For luminaires without LED there is the EnvioLux™ system luminaire.
How many gateways do we need?
About one EVL-Connect per 50 to 100 streetlights, at a spacing of around 100 m. The gateway takes the place of a Core node on its pole and bundles the data of the surrounding luminaires.
What happens if a luminaire or the power fails?
The mesh is self-healing: if a streetlight fails, the signal automatically finds a new route. An integrated, chemically non-flammable battery keeps processor and radio active, so the network keeps its state.
Do we need an additional control cable?
No. The nodes communicate by 2.4 GHz radio via the gateways. Installation takes under 15 minutes per luminaire, and new nodes then appear automatically in EnvioTerminal™.
Where is the data stored?
The radio network uses AES-128 encryption. The gateway transmits the data encrypted to a cloud in Europe, and operation is GDPR-compliant.
Ready for the next step?
In a 30-minute consultation, we discuss potential savings, feasibility and your project timeline.