Skip to content
ENVIOTECH

EnvioLux™ system luminaire

Upgrading to LED? Our street luminaire comes with smart control included: an EnvioLux™ node and a connection to EnvioTerminal™.

EnvioLux™ system luminaire in side view with pole mount
in five power classes
30–240 W
system efficacy
up to 160 lm/W
warranty
5 years

Retrofit where it makes sense. Replace where it is needed.

Existing luminaire with a mounted EnvioLux™ Core node
Add an EnvioLux™ Core node

Keep your LED luminaire. Add a node.

If the existing luminaire is technically suitable, it stays on the pole. A plug-in EnvioLux™ Core node makes it controllable.

Explore the Core Kit
Old street luminaire before replacementBeforeNew EnvioLux™ system luminaireAfter

Replace the old luminaire

No LED, no suitable interface or at the end of its service life: the system luminaire replaces the old one, including node and EnvioTerminal™.

Five power classes. Matched to the street.

The lighting design determines the class for each light point from road class, pole spacing, mounting height and control strategy.

Five power classes. Matched to the street.
PowerLuminous fluxTypical application
30 Wup to 4,800 lmFootpaths and cycle paths, secondary areas, quiet residential zones
50 Wup to 8,000 lmResidential streets and smaller access roads
80 Wup to 12,800 lmCollector and neighbourhood streets, wider paths
120 Wup to 19,200 lmMain roads and busier traffic areas
240 Wup to 38,400 lmLarge traffic areas and special requirements

Luminous flux depends on colour temperature, optics and project configuration.

Built for everyday municipal operation.

  • Up to 160 lm/W

    Efficient LED system with even illumination of the traffic area.

  • Surge protection

    Integrated 10 kV surge protection for overhead and underground networks.

  • Thermally monitored

    Temperature monitoring at the LED module keeps light output consistent over its service life.

  • Robust outdoors

    IP66 and IK09, aluminium housing with a safety glass cover.

  • Quick to install

    Ready-to-mount connection technology with a 1 m cable.

  • Prepared for control

    Compatible with Zhaga Book 18 and D4i, ready to join the ENVIOTECH system.

Power classes
30, 50, 80, 120 and 240 W
System efficacy
Up to 160 lm/W
Service life
Up to 100,000 operating hours (L70)
Colour temperature
1,800 to 6,500 K
Colour rendering
CRI 70 or higher
Dimming
1–10 V and DALI
Interface
Compatible with Zhaga Book 18 and D4i
Input voltage
AC 100 to 240 V, power factor > 0.95
Protection
IP66, IK09, 10 kV surge protection
Operating temperature
−40 °C to +50 °C
Warranty
5 years

Frequently asked questions

When is the system luminaire the right choice?

When the installation has no LED yet, offers no suitable interface or has reached the end of its service life. If an existing LED luminaire is technically suitable, the Core Kit is often enough.

Which power class do we need?

There are five classes from 30 to 240 W. The lighting design determines the class for each light point from road class, pole spacing, mounting height and control strategy.

Is the control already included?

Yes. The system luminaire always ships smart, with an EnvioLux™ node and a connection to EnvioTerminal™.

What warranty is provided?

5 years. Service life is up to 100,000 operating hours (L70).

Are there documents for tendering?

Yes. The technical datasheet and a tender specification template are available as PDFs under Technical data. The procurement body adapts the tender text to its own procedure.

Ready for the next step?

In a 30-minute consultation, we discuss potential savings, feasibility and your project timeline.

EnvioLux™ system luminaire in side view with pole mount
Book a consultation